Are you looking for how to configure BSNL CDMA EVDO in Ubuntu ? I have been using EVDO for last couple of years , didn't realize how burdensome it would be to configure in Ubuntu for amateurs. Here is a tutorial on how to configure BSNL EVDO modem in Ubuntu.
- Configuration
- Open the terminal firstly. (The path of terminal is Applications->Accessories->Terminal)
- Let OS know the device, please input the following command for Pritvi UE100 type modems:
sudo modprobe usbserial vendor=0x15eb product=0x1231
If you are having different device, you can find the corresponding product id using command 'lsusb.First try the command unplugging your device and later with device plugged in. You could find corresponding entry for your device from this command's output.
- Install tool
Check if you can visit Internet, if not, you can't install the basic tools. Input the following command:sudo apt-get install wvdial
sudo apt-get install gnome-ppp -
After installing wvdial,edit the file wvdial.conf using your favourite editor.
$sudo gedit /etc/wvdial.conf -
Add the following details to wvdial.conf file.Make sure to give password and username provided to you.
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Phone = #777
Username = xxxxxxxxxx
Password = xxxxxxxxxx
Dial Command = ATDT
Stupid Mode = 1
ISDN = 0 -
Execute the command after rebooting.( $sudo wvdial netconnectBoom !.. You are connected !!